Thyristor control light using ir remote control.

• In this project we use triac...used for which is  due to triigger by  the 89s52 microcontroller to the opto iso lator .

• The delayed firing angle is displayed into led display.

The output hwere in should have the motor or the lamp here,the output which varies which indicates that the intensity of the lamp or speed of the motor is varies.

• Now we will try to operate this ,once we press it is based on the delay,more hte delay less the power.
• now suppose if i take only 1 ms delay u find the the lamp is in full intensity almost,i make 2 it down a little,3,4,5,6.
• when u press 7 no u find the lamp is in down intisity,when press 8 the intensity is fallen.

when u press 9 it is al most vary to very very low. if i make 0 it stops.

for more detail...visithttps://drive.google.com/file/d/0B0hRtuMP07n-VzMxamNyZ2tFMEE/edit?usp=sharing

visit video https://drive.google.com/file/d/0B0hRtuMP07n-dTlaSExlMkR3Q2M/edit?usp=sharing